How to fix WisNode-Lora shield not really compatible with an Arduino (TX/RX lines not 5V compatible)



  • When start to use WisNode Lora board work with the 5V level Arduino board, we will have the trouble that between WisNode Lora board and Arduino board can not be communicated by the serial port. After testing, we found the Arduino board serial port is 5V ,and WisNode Lora board serial port is the level of 3.3V; Level mismatch between two serial ports Lead to abnormal communication.
    Now RAK fixed this issue and launch the Lora-shift board, With this converter board, you can plug in the Wisnode-lora shield with Arduino shiled, like the following picture showing:

    0_1494470298081_upload-8daaa3f2-04dc-44e5-97b4-bd17800dc8aa
    Lora-Shift board

    0_1494470314585_upload-05380429-fed0-44ba-b666-94696c03d983

    0_1494470356303_upload-3dd93dac-da98-4f89-8193-282f282abfc8

    0_1494470367639_upload-c576c932-8a06-44c6-a4e0-c05ec1f39780

    Only need to use wire connected Lora-Shift board’s 5V, 3.3V, and GND on WisNode Lora board , You can easily resolve this problem.

    0_1494470383823_upload-8ab52daf-4ddd-4836-9d1e-da899225c82c


登录后回复
 

与 RAK支持中心 的连接断开,我们正在尝试重连,请耐心等待